BuzzerBeater Forums

BB Global (English) > Training Simulator

Training Simulator

Set priority
Show messages by
This Post:
00
229484.18 in reply to 229484.17
Date: 11/12/2012 4:07:37 PM
Overall Posts Rated:
116116
Thanks so much. Incredibly helpful.

This Post:
00
229484.19 in reply to 229484.18
Date: 11/13/2012 1:23:34 PM
Overall Posts Rated:
32293229
This is awesome. That is all.

This Post:
00
229484.20 in reply to 229484.17
Date: 11/13/2012 3:06:42 PM
Red Devilsss
Bartar
Overall Posts Rated:
287287
nice job
thanks

This Post:
00
229484.21 in reply to 229484.17
Date: 11/16/2012 9:56:15 AM
Maddogs-Hellas
IV.5
Overall Posts Rated:
13091309
Hiya, i downloaded the v2.4, opened it but all icould change were the heights and ages, where when clicking on the selected ones, the scroll down option came up.
There was nothing i could do about the names, skills, potential, as when i clicked on any of them nothing happened, i wasnt given an option to erase and input the correct one, neither a scroll down appeared with set figures, at least for the skills and potential.

Is there something im doing wrong?

P.S i could change the trainer's level and also set the training regime, per week/year and assign (default)trainees to it.

This Post:
00
229484.22 in reply to 229484.21
Date: 11/19/2012 10:19:34 PM
Overall Posts Rated:
497497
I've been a little busy in RL, so I just saw your message. Thanks for bringing it up.

I couldn't duplicate your problem on my end. Please answer a few questions to help me figure out the problem:
1) What OS/program were you using to open the spreadsheet?
2) When you tried deleting the information in the "Current Skills" cells and typing in new information, did nothing happen? or did you get an error message/alert sound?
3) And am I correct that you did not open the spreadsheet in "read-only" mode?
4) Are you able to input anything into other blank cells on the sheet?

Thanks!

Is anyone else having this problem?

Last edited by rhyminsimon at 11/19/2012 10:31:49 PM

Join the official USA offsite forum for helper tools, camaraderie and advice! (http://s3.zetaboards.com/BuzzerBeater_USA_NT/index/) – Builder of the Training Simulator: (229484.1) – Former host of the Golden Clam Invitational (http://www.buzzerbeater.com/community/fedoverview.aspx?fe...)
This Post:
11
229484.23 in reply to 229484.22
Date: 11/20/2012 6:15:48 AM
Maddogs-Hellas
IV.5
Overall Posts Rated:
13091309
Thanks for the reply.
1)I opened the Drive with Firefox and downloaded the spreadsheet with PlanMaker.
Opening the PlanMaker file run into all the problems afore mentioned.

2) Nothing happened, no errormessage and/or sound alert

3) Read only mode

4) No

Anyways, i processed the spreadsheet on Drive itself. There i was able to input all the data,no problems. I wrote three players, set their training regime(for PG/SG) for 2 seasons( with them 3 in the 1,2,3 slots, deleted all the other default names).

For season 1, it gives me the training results of players 1 and 2, but for player 3, the skills remain the same with current skill.
For season 2, for players 1 and 2 results in all of their skills i get a "N/A" sign and player3 still remains the same with current skill.

For some reason, in season's 2 training regime, it doesnt read the command "PRESSURE (PG/SG)", as when i scroll over the N/A signs in the training results, it says PRESSURE (PG/SG) not found.

I have the same command in season's 1 training regime and at least for the first two players, training results come up properly.

Last edited by maddoghellas at 11/20/2012 6:34:28 AM

This Post:
11
229484.24 in reply to 229484.23
Date: 11/20/2012 11:01:31 AM
Overall Posts Rated:
497497
You're welcome!

I'm not familiar with PlanMaker. But I know that drive.google.com won't support the number of pages necessary to make the spreadsheet work.

Here's what I suggest you do:

First, try opening it without using read only mode. "Read-only" mode prevents you from being able to make any changes.

Then, if this doesn't help, my suggestion is that you download OpenOffice (http://www.openoffice.org/). It's a free office suite that will reliably let you work with spreadsheets. You should be able to successfully use the spreadsheet with this program.

Last edited by rhyminsimon at 11/20/2012 11:03:23 AM

Join the official USA offsite forum for helper tools, camaraderie and advice! (http://s3.zetaboards.com/BuzzerBeater_USA_NT/index/) – Builder of the Training Simulator: (229484.1) – Former host of the Golden Clam Invitational (http://www.buzzerbeater.com/community/fedoverview.aspx?fe...)
This Post:
00
229484.25 in reply to 229484.24
Date: 11/22/2012 7:21:30 AM
Maddogs-Hellas
IV.5
Overall Posts Rated:
13091309
Thank you for the instructions.
I downloaded it with openoffice. Switched to edit mode. Was able to input all the data,with one exception.

My first trainee has DR 10, current skill. I input the value, but as soon as i moved to the next slot, the DR box showed three hashtags instead of the 10 value. Rest of the slots,no problem.

Then, in the first season training results, his DR obviously shows no value(hashtags) AND also his HA is the same(no value-hashtags). Note that in the current skills section, i was able to input his HA skill value (9).

I thought that there maybe a problem with two digit numbers, but thats not the case, cause for instance in OD i put his current skill 8 and in first season training results section, it moved up to 10.33.

Last edited by maddoghellas at 11/22/2012 7:26:44 AM

This Post:
11
229484.26 in reply to 229484.25
Date: 11/22/2012 7:37:10 AM
Overall Posts Rated:
235235
The hashtags are because the column is not wide enough to display the number, just make it wider and it will display normally

This Post:
00
229484.27 in reply to 229484.26
Date: 11/22/2012 7:59:18 AM
Maddogs-Hellas
IV.5
Overall Posts Rated:
13091309
Thanks mate.

Wouldn't/shouldn't be offended if this thread was subtitled "instructions for dummies offered"!

This Post:
11
229484.28 in reply to 229484.24
Date: 11/23/2012 10:05:05 AM
Overall Posts Rated:
106106
Hi !
This tool is excellent ! Great job my friend!
I'll share my training results to support the work.

ps.: i've noticed there is a mismatch about ASW week (8 in the first sheet, 7 in player's sheet...) not a big matter of fact ! :°)

Advertisement